Clean Room Bench Laminar Flow Cabinet, Walk-in Fume Hood, Clean Room Booth Laminar Flow Cabinet
We supply and install Cleanroom Clean Room Bench Laminar Flow Cabinet walk-in Fume hood for the laboratory. We have a large selection of cleanroom Bench Laminar flow hoods, Clean room booths, and walk-in Fume hoods. Custom Horizontal flow and vertical flow hoods are available
- Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epoxy resin, cured at 220°C high temperature. and the surface is smooth, with a thickness of up to 1.15mm~1.2mm.
- Controller: Intelligent switch with digital display, multiple controls such as power on, fan, lighting, socket, sterilization, damper, etc..
- Glass sash: two vertical rising sashes, use explosion-proof 5mm tempered glass, aluminum alloy sash handle. It is designed by the weight balance method in the mechanical principle, and the left and right are connected by synchronous wheels.
- Lighting: Equipped with an LED 30W purification lamp, the luminosity exceeds 300LUX.
- Fume hood liner and Baffle: Use 5mm compact grade laminate, and the baffle is fixed with PP material.
- Junction box: The junction box with a circuit board and AC contactor makes wiring more convenient. Suitable for 220V voltage.
- Standard accessories: 4x Electrical Outlets/1x 250 or 315mmφ PP hood.